|
Message
|
Description
|
|
C51 – CCDAutopilot Data File – open/write error
|
This warning indicates that CCDAutopilot4 data file cannot be created / written to.
|
|
|
|
|
d11 - Data File Path does not exist
|
The directory corresponding to the path defined for the data file under Setup TAB / Device section has been deleted or its access has been restricted. In a network, it may mean that a network map has not been connected.
|
|
d12 - Data File Path could not be created
|
The program attempted to re-create this path without success. This may be caused by a change of write permission for the drive defined in the path. In a network, it may mean that a network map has not been connected.
|
|
d13 - Data cannot be written to data file
|
This message is shown when Start record button is pressed and there is no-write permission for the directory pointed by the path.
|
|
|
|
|
i21 - Image File Path does not exist
|
The directory corresponding to the path defined for the image files under Setup TAB / Graphs section has been deleted or its access has been restricted. In a network, it may mean that a network map has not been connected.
|
|
i22 - Image File Path could not be created
|
The program attempted to re-create this path without success. This may be caused by a change of write permission for the drive defined in the path. In a network, it may mean that a network map has not been connected.
|
|
i23 - Image Files cannot be created
|
This warning indicates that the image files are not being created. This may be caused by a lack of write permission for the directory pointed by the path.
|
|
i24 - Image Files FreeImage problem
|
This warning indicates that the image files are not being created because of a problem with FreeImage library. The FreeImage.dll file should be installed in the same directory as AAG_CloudWatcher.exe (default) or in the windows system directory (usually \Windows\System32).
|
|
|
|
|
r31 – COMM Data File– open / read error
|
This warning indicates the COMM data file does not exist or is corrupted.
|
|
|
|
|
w41 – COMM Data File– open / write error
|
This warning indicates that COMM data file cannot be created.
|
|
w42 – COMM Data too old.
|
This warning indicates that the COMM Data is older than the timeout value defined in Device section of the Setup TAB.
|
